<div>Thanks to the optical communication, noise immunity has been greatly improved, and long distance wiring is made possible by up to 800m (maximum of 50m between stations x 16 axes). Fully closed loop control compatible servo amplifier is also available (MR-J3-B-RJ006). MR-J3-B / MR-J4 SSCNET Fitted with JAE PF-2D103 Connector or JAE CF-2D103-S (depends of versions)</div><div><br></div><div>The minimum bending radius of the fiber-optic cable is 25mm for MITSUBISHI MR-J3BUS---M and 50mm for MR-J3BUS M-A/-B.</div><div><br></div><div>If using these cables under the minimum bending radius, performance cannot be guaranteed.</div><div>• If the ends of the fiber-optic cable are dirty, the light will be obstructed, resulting malfunctions. Always clean the ends if dirty.</div><div>• Do not tighten the fiber-optic cable with cable ties, etc.</div><div>• Do not look directly at the light when the fiber-optic cable is not connected.</div>
MITSUBISHI Fiber optic & Cables
Find and Buy online your MITSUBISHI Fiber optic & Cables for Servo amplifiers and Servo motors from a wide range of MITSUBISHI MR-J3BUS M fiber cables in stock compatible with MR-J3-B / MR-J4 Servo amplifiers (Melservo / Melsec) or any other Industrial applications requires SSCNET III Interface using MR-J3BUS Optical fiber cable Different lengths are offered that depends of the requirements, prices and availability of the INDRAMAT MR-J3BUS M-A/-B are displayed in realtime on our website.
The MITSUBISHI SSCNET III MR-J3BUS fiber-optic cables thoroughly shut out noise that enters from the power cable or external devices. Noise immunity is dramatically improved as compared to metal cables. By adopting SSCNET (optical communication), a complete synchronous system can be configured by using the high-speed serial communication with cycle time as fast as 0.44ms between the controller and servo amplifier. SSCNET# can be set up just by inserting a dedicated cable (fiber-optic cable) into connectors, resulting in reduced wiring and preventing possibility of wiring error.
MITSUBISHI MR-JCCBL5M-H Encoder Cable 5m HFLEX
In Stock Immediate shipmentNewStarting at €60.00
MITSUBISHI MR-JCCBL5M-L Encoder Cable 5m Standard
Out of stock Shipment within 3 daysNewStarting at €50.00
MITSUBISHI MR-JRCBL2M-H PWR/Encoder 2M HFLEX Cable
In Stock Immediate shipmentNewStarting at €60.00
MITSUBISHI MR-PWS1CBL5M-A1-H Servo motor power Cable 5M
In Stock Shipment within 3 daysNewStarting at €150.00
MITSUBISHI Q170ENCCBL10M-A Serial absolute synchronous encoder cable 10M for MR-J4/ Q171ENC-W8
In Stock Shipment within 3 daysNewStarting at €220.00
MITSUBISHI Q170ENCCBL5M-A Serial absolute synchronous encoder cable 5M for MR-J4/ Q171ENC-W8
In Stock Immediate shipmentNewStarting at €200.00
MITSUBISHI Q173DVCBL1M CPU cable To Q173DV board
In Stock Immediate shipmentNewStarting at €100.00
MITSUBISHI USB-MR-CPCATCBL3M Cable for MR-J2S Servo drive USB Version
In Stock Immediate shipmentNewStarting at €200.00