<div><b>Fanuc 18i & Fanuc 180i</b> : A02B-0238-B501, A02B-0238-B611, A02B-0238-B621, A02B-0238-B531, A02B-0238-B541, A02B-0238-B511, A02B-0238-B521, A02B-0238-B801, A02B-0238-B811, A02B-0238-B821, A02B-0238-B831, A02B-0238-B841, A02B-0238-B851, A02B-0238-B551, A02B-0238-B561, A02B-0238-B571, A02B-0238-B651, A02B-0238-B661, A02B-0238-B671, A02B-0238-B751, A02B-0238-B761, A02B-0238-B501, A02B-0238-B511, Fanuc 180is : A02B-0270-B501, A02B-0270-B511, A02B-0238-B502, A02B-0238-B612, A02B-0238-B622, A02B-0238-B532, A02B-0238-B542, A02B-0238-B512, A02B-0238-B522, A02B-0238-B802, A02B-0238-B812, A02B-0238-B822, A02B-0238-B832, A02B-0238-B842, A02B-0238-B852, A02B-0238-B552, A02B-0238-B562, A02B-0238-B572, A02B-0238-B652, A02B-0238-B662, A02B-0238-B672, A02B-0238-B752, A02B-0238-B762, A02B-0238-B772, A02B-0238-B508, A02B-0238-B618, A02B-0238-B628, A02B-0238-B538, A02B-0238-B548, A02B-0238-B518, A02B-0238-B528, A02B-0238-B803, A02B-0238-B813, A02B-0238-B823, A02B-0238-B833, A02B-0238-B843, A02B-0238-B853, A02B-0238-B558, A02B-0238-B568, A02B-0238-B578, A02B-0238-B658, A02B-0238-B668, A02B-0238-B678, A02B-0238-B758, A02B-0238-B768, A02B-0238-B778, A02B-0238-B503, A02B-0238-B613, A02B-0238-B623, A02B-0238-B533, A02B-0238-B543, A02B-0238-B513, A02B-0238-B523, A02B-0238-B804, A02B-0238-B814, A02B-0238-B824, A02B-0238-B834, A02B-0238-B844, A02B-0238-B854, A02B-0238-B553, A02B-0238-B563, A02B-0238-B573, A02B-0238-B653, A02B-0238-B663, A02B-0238-B673, A02B-0238-B753, A02B-0238-B763, A02B-0238-B773<div><br></div><div><b>Fanuc 180is </b>: A02B-0270-B501, A02B-0270-B511, A02B-0270-B502, A02B-0270-B512, A02B-0270-B508, A02B-0270-B513, A02B-0270-B504, A02B-0270-B514</div></div><div><br></div> The <span style="font-weight: bold;">FANUC 18i CNC</span> has been steadily reduced in size using surface–mount and custom LSI technologies for electronic components. The <span style="font-weight: bold;">FANUC 18i-A 18i-B CNC</span> also is designed to be protected from external noise. However, it is difficult to measure the level and frequency of noise quantitatively, and noise has many uncertain factors. It is important to prevent both noise from being generated and generated noise from being introduced into the CNC. This precaution improves the stability of the CNC machine tool system. The CNC component units are often installed close to the parts generating noise in the power magnetics cabinet. Possible noise sources into the CNC are capacitive coupling, electromagnetic induction, and ground loops. When designing the power magnetics cabinet, guard against noise in the machine as described in the following section.<br><br>Part programs, offset data, and system parameters are stored in CMOS memory in the control unit. The power to the CMOS memory is backed up by a lithium battery mounted on the front panel of the control unit. The above data is not lost even when the main battery goes dead. The backup battery is mounted on the control unit at shipping. This battery can maintain the contents of memory for about a year. When the voltage of the battery becomes low, alarm message “BAT” blinks on the display and the battery alarm signal is output to the PMC. <span style="font-weight: bold;">Fanuc 18i </span>. When this alarm is displayed, replace the battery as soon as possible. In general, the battery can be replaced within two or three weeks, however, this depends on the system configuration. If the voltage of the battery becomes any lower, memory can no longer be backed up. Turning on the power to the<span style="font-weight: bold;"> Fanuc 18i</span> control unit in this state causes system alarm 910 (SRAM parity alarm) to occur because the contents of memory are lost. Clear the entire memory and reenter data after replacing the battery.<br>
Fanuc 18i 180i CNC Series
FANUC Series 18i Model A (18i-MA 18i-TA) or 18 Model B (18i-MB 18i-TB) / 180i (210i-MA 210i-TA) (Open
CNC Computer) are series of Ultra-Compact, Ultra-Thin CNC integrated
LCD and network features, for versatile machine tools including lathe,
machining center, compound machine with milling and turning ability,
gear finishing machine and so on. Integrated FANUC 18i CNC with LCD Display (7.2", 8.4", 9.5", 10.4", 12.1", 15.0" LCD),
including all the small pcb (Fanuc graphic card, Fanuc Axes Servo card,
Fanuc CPU Pentium Card, From module, Dram Module and also the Inverter
of the LCD) Reduction of Cable by Ultra-high-speed Serial Data Transfer.
Fanuc 18i PERIODIC Maintenance Spare parts : FANS, BATTERIES, BACKLIGHT, LCD.
Fanuc 18i PERIODIC Maintenance Spare parts : FANS, BATTERIES, BACKLIGHT, LCD.
RefurbishedStarting at €790.00
A20B-8001-0640 FANUC HSSB Interface board
In Stock Immediate shipmentNewStarting at €650.00
A20B-8001-0641 FANUC HSSB Interface board New Version
In Stock Immediate shipmentNewStarting at €400.00
NewStarting at €500.00
A20B-8001-0910 Fanuc 21i 18i 16i Inverter PCB for LCD Mono
In Stock Immediate shipmentNewStarting at €130.00
A20B-8001-0920 Fanuc Inverter LCD 10.4 Color
In Stock Immediate shipmentNewStarting at €250.00
A20B-8002-0191 Fanuc Sub-CPU Board 16i 18i 21i B
In Stock Shipment within 3 daysNewStarting at €550.00
RefurbishedExchange serviceStarting at €1,500.00
A20B-8100-0200 Fanuc Inverter PCB LCD 10.4 16i 18i 21i
In Stock Immediate shipmentNewStarting at €250.00
A20B-8100-0461 Fanuc 180i Motherboard Pentium MMX
Out of stock Immediate shipmentNewStarting at €1,900.00