A61L-0001-0116 A02B-0200-C100 Fanuc Separate 9'' PDP Unit Plasma

Buy online your FANUC 9inch PDP Unit Separate stand alone Monochrome Plasma reference FANUC A02B-0200-C100 for sale online. This FANUC PDP Unit (Plasma display interface) also identified as FANUC A61L-001-0116 including the power supply module A13B-0169-C001. Conforming to safety standards +24V input. (CE Mark) for the Fanuc plasma monitor A61L-0001-0116, this Fanuc is installed on the Fanuc 16, 185, 21, Power Mate i series and other Fanuc ompatibles. This FANUC 9 inch PDP Unit A61L-0001-0116 (A02B-0200-C100, A13B-0169-C001) comes with a warranty.

Fine adjustment of the video signal is supported to enable its use with plasma displays of separate type PDP. This adjustment is necessary to compensate for errors resulting from the combination of NC devices and
cables. Adjustment of the video signal is necessary if you have replaced the display unit, cable, or a hardware component of the display circuit in the NC, either as part of regular field maintenance or the correct a failure.

Eliminating flicker - Switch TM1
If flicker occures, change the TM1 setting to another setting. Normally one of these settings will eliminate flicker.

Adjusting the horizontal position Switch SW1
(1) The screen can be shifted horizontally in units of dots.
(2) Adjust the horizontal position such that the entire screen is visible. Only one setting can successfully realize this positioning.